這是我目前在用的q101.sh 內容提供參考 我eeepc 右邊的usb port會失效

#!/bin/sh
while ! [ $usbPort ];do
echo "Try to set usbPort"
usbPort=`lsusb | grep Quanta | cut -d ' ' -f 2 | sed 's/0//g'`
sleep 1
done
sleep 5
usbPortN=`sudo ls /sys/bus/usb/devices/usb$usbPort/ | grep $usbPort | sed -n '2p'`
echo "USB device port on: usb$usbPort"
#sudo rmmod usbserial
#sudo modprobe usbserial vendor=0x0408 product=0xea02
sudo usb_modeswitch
echo "Switch usb mode"
echo " "
if ! [ -e /dev/ttyUSB1 ];then
echo "Suspend Usb storage device"
echo " "
echo "suspend" | sudo tee /sys/bus/usb/devices/usb$usbPort/$usbPortN/power/level
echo "Lock the usb device"
echo " "
fi
sleep 3

ttyDetect=""

until [ "$ttyDetect" != "" ];do
if ["$ttyDetect" != ""];then
ttyDetect=`ls /dev/ | grep ttyUSB | sed -n '1p' | sed 's,ttyUSB,,' `
echo "Try to detect /dev/ttyUSB ===> None"
#echo "$ttyDetect"
sleep 1
else
echo "Modem Already plugin"
fi
done

sudo wvdialconf
sleep 1
cat /etc/wvdial.conf | sed "s,ATZ,AT+CFUN=1," > ~/wvdial.conf.tmp
sudo cp ~/wvdial.conf.tmp /etc/wvdial.conf
sleep 1
sudo wvdial