ubuntu 9.04 裝 台灣大哥大 3g (Q101) 無線網卡
裝不起來. 請問要如何裝阿？

請問是這個嗎？
http://www.ubuntu-tw.org/modules/newbb/viewtopic.php?post_id=61202

小弟試了大大的連結去try，仍然無法使用q101上網。
小弟try的方法如下：

Step(1)
Download usb_modeswitch-1.0.2.tar.bz2
下載的網址如下：http://www.draisberghof.de/usb_modeswitch/usb_modeswitch-1.0.2.tar.bz2

下載完畢解壓縮後桌面上會有一個usb_modeswitch-1.0.2的資料匣 。
我把該資料匣裡的usb_modeswitch 這個檔 copy 到 /bin 下
接著又把usb_modeswitch.conf 這個檔 copy 到 /etc下


Step(2)
安裝 libusb
apt-get install libusb-dev

Step(3)
安裝 wvdial(Ubuntu 9.04預設是沒有安裝)
apt-get install wvdial


Step(4)
編寫script
1 vim mytest.sh
2 貼上以下的內容
#--------------------------------------------------------
#!/bin/sh
usbPort=`lsusb | grep Quanta | cut -d ' ' -f 2 | sed 's/0//g'`
echo "USB裝置所在位置：usb$usbPort"
usb_modeswitch
echo "USB裝置ID變更"
echo " "
sleep 3
echo "停止USB隨身裝置"
echo " "
echo "suspend" > /sys/bus/usb/devices/usb$usbPort/$usbPort-1/power/level
echo "鎖定USB裝置ID"
echo " "
modprobe usbserial vendor=0x0408 product=0xea02
sleep 8
echo "重新搜尋 Q101 所在 USB 位置....並設定 /etc/wvdial"

wvdialconf

echo "啟動 wvdial 進行撥號...."

echo " "
sleep 5
wvdial &
#------------------------------------------------------------------------------
3 chmod +x mytest.sh

Step(5)
執行mytest.sh
./mytest.sh
--------------------------
執行mytest.sh後，仍然無法使用台灣大哥大的q101無線網卡上網。
把執行的錯誤訊息以上如下：

root@ubuntu:/home/james/桌面/usb_modeswitch-1.0.2# ./mytest.sh
USB裝置所在位置：usb4

* usb_modeswitch: tool for controlling "flip flop" mode USB devices
* Version 1.0.2 (C) Josua Dietze 2009
* Works with libusb 0.1.12 and probably other versions

No default vendor/product ID given. Aborting.

USB裝置ID變更

停止USB隨身裝置

鎖定USB裝置ID

重新搜尋 Q101 所在 USB 位置....並設定 /etc/wvdial
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1 S2 S3


Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to .
啟動 wvdial 進行撥號....

--> WvDial: Internet dialer version 1.60
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory

這是我目前在用的q101.sh 內容提供參考 我eeepc 右邊的usb port會失效

#!/bin/sh
while ! [ $usbPort ];do
echo "Try to set usbPort"
usbPort=`lsusb | grep Quanta | cut -d ' ' -f 2 | sed 's/0//g'`
sleep 1
done
sleep 5
usbPortN=`sudo ls /sys/bus/usb/devices/usb$usbPort/ | grep $usbPort | sed -n '2p'`
echo "USB device port on: usb$usbPort"
#sudo rmmod usbserial
#sudo modprobe usbserial vendor=0x0408 product=0xea02
sudo usb_modeswitch
echo "Switch usb mode"
echo " "
if ! [ -e /dev/ttyUSB1 ];then
echo "Suspend Usb storage device"
echo " "
echo "suspend" | sudo tee /sys/bus/usb/devices/usb$usbPort/$usbPortN/power/level
echo "Lock the usb device"
echo " "
fi
sleep 3

ttyDetect=""

until [ "$ttyDetect" != "" ];do
if ["$ttyDetect" != ""];then
ttyDetect=`ls /dev/ | grep ttyUSB | sed -n '1p' | sed 's,ttyUSB,,' `
echo "Try to detect /dev/ttyUSB ===> None"
#echo "$ttyDetect"
sleep 1
else
echo "Modem Already plugin"
fi
done

sudo wvdialconf
sleep 1
cat /etc/wvdial.conf | sed "s,ATZ,AT+CFUN=1," > ~/wvdial.conf.tmp
sudo cp ~/wvdial.conf.tmp /etc/wvdial.conf
sleep 1
sudo wvdial