wingyan 寫到：
tail -n0 /var/log/kern.log這個指令不能執行

抱歉，上文命令已修正
如果出現無法存取情形請用系統管理身份執行（sudo）

wingyan 寫到：
wingyan@wingyan-desktop:~$ sudo modprobe-r cx23885
[sudo] password for wingyan:
sudo: modprobe-r: command not found

少一個空格，請直接複製文章內的命令

wingyan 寫到：
wingyan@wingyan-desktop:~$ sudo modprobe cs23885 card=12
FATAL: Module cs23885 not found.

筆誤，上文已修正

wingyan 寫到：
另外,linux-image-*-generic的軟體包安裝後發生顯示之類的問題.

錯誤訊息為何？

V字龍:

麻煩你吧!至於linux-image-*-generic我未COPY得到,一會兒再貼,因為那個一登入系統就會出現.

wingyan@wingyan-desktop:~$ sudo tail -n0 --follow /var/log/kern.log
[sudo] password for wingyan:
Jan 3 18:54:06 wingyan-desktop kernel: [ 1178.535686] Linux video capture interface: v2.00
Jan 3 18:54:06 wingyan-desktop kernel: [ 1178.539831] cx23885 driver version 0.0.3 loaded
Jan 3 18:54:06 wingyan-desktop kernel: [ 1178.539974] CORE cx23885[0]: subsystem: 14f1:8577, board: Leadtek Winfast PxDVR3200 H [card=12,insmod option]
Jan 3 18:54:07 wingyan-desktop kernel: [ 1179.205061] cx25840 2-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
Jan 3 18:54:08 wingyan-desktop kernel: [ 1179.883140] cx25840 2-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
Jan 3 18:54:08 wingyan-desktop kernel: [ 1179.899497] cx23885_dvb_register() allocating 1 frontend(s)
Jan 3 18:54:08 wingyan-desktop kernel: [ 1179.899500] cx23885[0]: cx23885 based dvb card
Jan 3 18:54:08 wingyan-desktop kernel: [ 1179.938205] cx23885[0]: frontend initialization failed
Jan 3 18:54:08 wingyan-desktop kernel: [ 1179.938210] cx23885_dvb_register() dvb_register failed err = -22
Jan 3 18:54:08 wingyan-desktop kernel: [ 1179.938211] cx23885_dev_setup() Failed to register dvb on VID_C
Jan 3 18:54:08 wingyan-desktop kernel: [ 1179.938216] cx23885_dev_checkrevision() Hardware revision = 0xb0
Jan 3 18:54:08 wingyan-desktop kernel: [ 1179.938223] cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xfb200000
Jan 3 18:54:41 wingyan-desktop kernel: [ 1213.594450] type=1400 audit(1357210481.976:30): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=867 comm="cupsd" pid=867 comm="cupsd" capability=36 capname="block_suspend"
Jan 3 19:03:59 wingyan-desktop kernel: [ 1770.004951] totem[3770]: segfault at 14 ip b67adf4a sp bff46300 error 4 in libcogl.so.9.1.0[b6796000+85000]
Jan 3 19:14:57 wingyan-desktop kernel: [ 2427.283239] totem[3910]: segfault at 14 ip b6758f4a sp bfac3b00 error 4 in libcogl.so.9.1.0[b6741000+85000]
Jan 3 19:15:19 wingyan-desktop kernel: [ 2449.554028] totem[3922]: segfault at 14 ip b67cbf4a sp bf907470 error 4 in libcogl.so.9.1.0[b67b4000+85000]
Jan 3 19:34:27 wingyan-desktop kernel: [ 3595.152820] usb 3-1: USB disconnect, device number 2
Jan 3 19:34:27 wingyan-desktop kernel: [ 3595.153000] xhci_hcd 0000:04:00.0: WARN Event TRB for slot 1 ep 2 with no TDs queued?
Jan 3 19:34:27 wingyan-desktop kernel: [ 3595.457919] usb 3-1: new low-speed USB device number 3 using xhci_hcd
Jan 3 19:34:27 wingyan-desktop kernel: [ 3595.486256] usb 3-1: New USB device found, idVendor=1c4f, idProduct=0002
Jan 3 19:34:27 wingyan-desktop kernel: [ 3595.486260] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan 3 19:34:27 wingyan-desktop kernel: [ 3595.486262] usb 3-1: Product: USB Keykoard
Jan 3 19:34:27 wingyan-desktop kernel: [ 3595.486263] usb 3-1: Manufacturer: USB
Jan 3 19:34:27 wingyan-desktop kernel: [ 3595.486422] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
Jan 3 19:34:27 wingyan-desktop kernel: [ 3595.486426] usb 3-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
Jan 3 19:34:27 wingyan-desktop kernel: [ 3595.490424] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.0/input/input15
Jan 3 19:34:27 wingyan-desktop kernel: [ 3595.490624] hid-generic 0003:1C4F:0002.0004: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:04:00.0-1/input0
Jan 3 19:34:27 wingyan-desktop kernel: [ 3595.492885] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.1/input/input16
Jan 3 19:34:27 wingyan-desktop kernel: [ 3595.493110] hid-generic 0003:1C4F:0002.0005: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:04:00.0-1/input1

wingyan 寫到：
另外,linux-image-*-generic的軟體包安裝後發生顯示之類的問題.

顯示之類的問題大概是因為 NVIDIA 原廠驅動程式沒有重新建構對應新的作業系統核心版本所致

根據 NVIDIA 的說明，請重新安裝一次 NVIDIA 原廠驅動程式之後重新啟動應可以恢復正常

如果是透過 ubuntu 官方軟體來源安裝 NVIDIA 原廠驅動程式的話直接重新安裝 nvidia-* 軟體包即可

作業系統核心紀錄 寫到：
Jan 3 18:54:06 wingyan-desktop kernel: [ 1178.535686] Linux video capture interface: v2.00
Jan 3 18:54:06 wingyan-desktop kernel: [ 1178.539831] cx23885 driver version 0.0.3 loaded
Jan 3 18:54:06 wingyan-desktop kernel: [ 1178.539974] CORE cx23885[0]: subsystem: 14f1:8577, board: Leadtek Winfast PxDVR3200 H [card=12,insmod option]
Jan 3 18:54:07 wingyan-desktop kernel: [ 1179.205061] cx25840 2-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
Jan 3 18:54:08 wingyan-desktop kernel: [ 1179.883140] cx25840 2-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
Jan 3 18:54:08 wingyan-desktop kernel: [ 1179.899497] cx23885_dvb_register() allocating 1 frontend(s)
Jan 3 18:54:08 wingyan-desktop kernel: [ 1179.899500] cx23885[0]: cx23885 based dvb card
Jan 3 18:54:08 wingyan-desktop kernel: [ 1179.938205] cx23885[0]: frontend initialization failed
Jan 3 18:54:08 wingyan-desktop kernel: [ 1179.938210] cx23885_dvb_register() dvb_register failed err = -22
Jan 3 18:54:08 wingyan-desktop kernel: [ 1179.938211] cx23885_dev_setup() Failed to register dvb on VID_C
Jan 3 18:54:08 wingyan-desktop kernel: [ 1179.938216] cx23885_dev_checkrevision() Hardware revision = 0xb0
Jan 3 18:54:08 wingyan-desktop kernel: [ 1179.938223] cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xfb200000

強制選取電視卡後，載入軔體資料成功，但 DVB 設定方面失敗。
那接下來有點麻煩了，得多做點試探工作

1.
　請於終端機下執行「tail -n0 --follow /var/log/kern.log」命令，然後於另一個終端機下分別執行
　sudo modprobe -r cx23885
　sudo modprobe cx23885 card=31
　然後按 Ctrl-C 中斷 tail 程式運行，將該視窗輸出的訊息貼到這裡

2.

wingyan 寫到：
Extract the file hcw85bda.sys from the zip into the current dir:
# unzip -j HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip Driver85/hcw85bda.sys
請問這個步驟是怎樣?

xc3028 的軔體資料只要安裝 linux-firmware-nonfree 軟體包即可

　請於終端機下執行「tail -n0 --follow /var/log/kern.log」命令，然後於另一個終端機下分別執行
　sudo modprobe -r cx23885
　sudo modprobe zl10353
　sudo modprobe xc2028
　sudo modprobe cx23885
　然後按 Ctrl-C 中斷 tail 程式運行，將該視窗輸出的訊息貼到這裡

3.
請先行安裝 pastebinit 軟體包

然後同上文，安裝 3.5.x 版本的 Linux 作業系統核心軟體包，重新開機後執行「dmesg | pastebinit」命令，將輸出的網址貼上來

　請於終端機下執行「tail -n0 --follow /var/log/kern.log」命令，然後於另一個終端機下分別執行
　sudo modprobe -r cx23885
　sudo modprobe zl10353
　sudo modprobe xc2028
　sudo modprobe cx23885
　然後按 Ctrl-C 中斷 tail 程式運行，將該視窗輸出的訊息貼到這裡


wingyan@wingyan-desktop:~$ sudo tail -n0 --follow /var/log/kern.log
[sudo] password for wingyan:
Jan 4 18:01:42 wingyan-desktop kernel: [ 325.289380] audit_printk_skb: 51 callbacks suppressed
Jan 4 18:01:42 wingyan-desktop kernel: [ 325.289383] type=1400 audit(1357293702.178:29): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=895 comm="cupsd" pid=895 comm="cupsd" capability=36 capname="block_suspend"
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.504902] Linux video capture interface: v2.00
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508717] cx23885 driver version 0.0.3 loaded
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508748] cx23885[0]: Your board isn't known (yet) to the driver.
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508748] cx23885[0]: Try to pick one of the existing card configs via
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508748] cx23885[0]: card=<n> insmod option. Updating to the latest
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508748] cx23885[0]: version might help as well.
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508750] cx23885[0]: Here is a list of valid choices for the card=<n> insmod option:
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508752] cx23885[0]: card=0 -> UNKNOWN/GENERIC
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508753] cx23885[0]: card=1 -> Hauppauge WinTV-HVR1800lp
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508754] cx23885[0]: card=2 -> Hauppauge WinTV-HVR1800
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508755] cx23885[0]: card=3 -> Hauppauge WinTV-HVR1250
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508756] cx23885[0]: card=4 -> DViCO FusionHDTV5 Express
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508758] cx23885[0]: card=5 -> Hauppauge WinTV-HVR1500Q
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508759] cx23885[0]: card=6 -> Hauppauge WinTV-HVR1500
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508760] cx23885[0]: card=7 -> Hauppauge WinTV-HVR1200
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508761] cx23885[0]: card=8 -> Hauppauge WinTV-HVR1700
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508762] cx23885[0]: card=9 -> Hauppauge WinTV-HVR1400
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508763] cx23885[0]: card=10 -> DViCO FusionHDTV7 Dual Express
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508764] cx23885[0]: card=11 -> DViCO FusionHDTV DVB-T Dual Express
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508765] cx23885[0]: card=12 -> Leadtek Winfast PxDVR3200 H
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508767] cx23885[0]: card=13 -> Compro VideoMate E650F
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508768] cx23885[0]: card=14 -> TurboSight TBS 6920
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508769] cx23885[0]: card=15 -> TeVii S470
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508770] cx23885[0]: card=16 -> DVBWorld DVB-S2 2005
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508771] cx23885[0]: card=17 -> NetUP Dual DVB-S2 CI
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508772] cx23885[0]: card=18 -> Hauppauge WinTV-HVR1270
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508773] cx23885[0]: card=19 -> Hauppauge WinTV-HVR1275
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508774] cx23885[0]: card=20 -> Hauppauge WinTV-HVR1255
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508775] cx23885[0]: card=21 -> Hauppauge WinTV-HVR1210
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508777] cx23885[0]: card=22 -> Mygica X8506 DMB-TH
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508778] cx23885[0]: card=23 -> Magic-Pro ProHDTV Extreme 2
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508779] cx23885[0]: card=24 -> Hauppauge WinTV-HVR1850
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508780] cx23885[0]: card=25 -> Compro VideoMate E800
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508781] cx23885[0]: card=26 -> Hauppauge WinTV-HVR1290
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508782] cx23885[0]: card=27 -> Mygica X8558 PRO DMB-TH
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508783] cx23885[0]: card=28 -> LEADTEK WinFast PxTV1200
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508784] cx23885[0]: card=29 -> GoTView X5 3D Hybrid
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508786] cx23885[0]: card=30 -> NetUP Dual DVB-T/C-CI RF
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508787] cx23885[0]: card=31 -> Leadtek Winfast PxDVR3200 H XC4000
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508788] cx23885[0]: card=32 -> MPX-885
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508789] cx23885[0]: card=33 -> Mygica X8507
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508790] cx23885[0]: card=34 -> TerraTec Cinergy T PCIe Dual
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508791] cx23885[0]: card=35 -> TeVii S471
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508792] cx23885[0]: card=36 -> Hauppauge WinTV-HVR1255
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.508922] CORE cx23885[0]: subsystem: 14f1:8577, board: UNKNOWN/GENERIC [card=0,autodetected]
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.637045] cx23885_dev_checkrevision() Hardware revision = 0xb0
Jan 4 18:03:07 wingyan-desktop kernel: [ 410.637053] cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xfb200000

--------------------------------------------------------------------

強制選取電視卡後，載入軔體資料成功，但 DVB 設定方面失敗。
那接下來有點麻煩了，得多做點試探工作

1.
　請於終端機下執行「tail -n0 --follow /var/log/kern.log」命令，然後於另一個終端機下分別執行
　sudo modprobe -r cx23885
　sudo modprobe cx23885 card=31
　然後按 Ctrl-C 中斷 tail 程式運行，將該視窗輸出的訊息貼到這裡




wingyan@wingyan-desktop:~$ sudo tail -n0 --follow /var/log/kern.log
[sudo] password for wingyan:
Jan 4 18:12:58 wingyan-desktop kernel: [ 1000.789540] Linux video capture interface: v2.00
Jan 4 18:12:58 wingyan-desktop kernel: [ 1000.793500] cx23885 driver version 0.0.3 loaded
Jan 4 18:12:58 wingyan-desktop kernel: [ 1000.793643] CORE cx23885[0]: subsystem: 14f1:8577, board: Leadtek Winfast PxDVR3200 H XC4000 [card=31,insmod option]
Jan 4 18:12:58 wingyan-desktop kernel: [ 1000.991801] cx25840 14-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.669512] cx25840 14-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.719510] tuner 12-0061: Tuner -1 found with type(s) Radio TV.
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.748337] xc4000 12-0061: creating new instance
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.748916] xc4000: Device not found at addr 0x61 (0xffff)
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.748919] xc4000 12-0061: destroying instance
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.749004] cx23885[0]: registered device video0 [v4l2]
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.749079] cx23885[0]: registered device vbi0
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.749983] cx23885[0]: registered ALSA audio device
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.754319] tuner 12-0061: Tuner has no way to set tv freq
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.768559] cx23885_dvb_register() allocating 1 frontend(s)
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.768563] cx23885[0]: cx23885 based dvb card
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.768868] cx23885[0]: frontend initialization failed
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.768870] cx23885_dvb_register() dvb_register failed err = -22
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.768871] cx23885_dev_setup() Failed to register dvb on VID_C
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.768876] cx23885_dev_checkrevision() Hardware revision = 0xb0
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.768882] cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xfb200000

請先行安裝 pastebinit 軟體包

然後同上文，安裝 3.5.x 版本的 Linux 作業系統核心軟體包，重新開機後執行「dmesg | pastebinit」命令，將輸出的網址貼上來


linux什麼3.5.x??

wingyan 寫到：
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.748337] xc4000 12-0061: creating new instance
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.748916] xc4000: Device not found at addr 0x61 (0xffff)
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.748919] xc4000 12-0061: destroying instance
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.749004] cx23885[0]: registered device video0 [v4l2]
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.749079] cx23885[0]: registered device vbi0
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.749983] cx23885[0]: registered ALSA audio device
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.754319] tuner 12-0061: Tuner has no way to set tv freq
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.768559] cx23885_dvb_register() allocating 1 frontend(s)
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.768563] cx23885[0]: cx23885 based dvb card
Jan 4 18:12:59 wingyan-desktop kernel: [ 1001.768868] cx23885[0]: frontend initialization failed

結果也不是 XC4000 的卡啊...

wingyan 寫到：
請先行安裝 pastebinit 軟體包

然後同上文，安裝 3.5.x 版本的 Linux 作業系統核心軟體包，重新開機後執行「dmesg | pastebinit」命令，將輸出的網址貼上來


linux什麼3.5.x??

　請至
　ftp://free.nchc.org.tw/ubuntu/pool/main/l/linux/
　下載 3.5.x 版本的 linux-image-*-generic 軟體包安裝
　然後用那個版本的 Linux 作業系統核心開機看看能不能用
　另外開機之後再附一次 /var/log/kern.log 的內容

另外請參與 LinuxTV Leadtek WinFast PxDVR3200 H 條目的編輯，將失敗的情形加進去
http://www.linuxtv.org/wiki/index.php/Leadtek_WinFast_PxDVR3200_H

另外敬請（用非主要的電子郵件信箱）訂閱 linux-media 郵遞清單(mailing list)，協助開發者解決此問題
http://vger.kernel.org/vger-lists.html#linux-media
Linux video input infrastructure (V4L/DVB) development discussion and
bug report mailing list. Covers drivers for Web Cams, Analog and
Digital input and TV capture and AM/FM radio receivers.

下載 3.5.x 版本的 linux-image-*-generic 軟體包安裝.打指令都可以安裝嗎?

但linux-headers-3.5.0-17-generic的錯誤的硬體架構AMD64,而linux-headers-3.5.0-17-generic就沒法滿相依性,Header files related to Linux kernel version 3.5.0就可升級,Linux kernel headers for version 3.5.0 on 32 bit x86 SMP是錯誤的硬體架構AMD64,Linux kernel headers for version 3.5.0 on 32 bit x86 SMP就有可用升級,Header files related to Linux kernel version 3.5.0就有可用升級,Linux kernel headers for version 3.5.0 on 32 bit x86 SMP是錯誤的硬體架構AMD64,Linux kernel headers for version 3.5.0 on 32 bit x86 SMP就有可用升級,Header files related to Linux kernel version 3.5.0就有可用升級,Linux kernel headers for version 3.5.0 on 32 bit x86 SMP是錯誤的硬體架構AMD64,Linux kernel headers for version 3.5.0 on 32 bit x86 SMP就有可用升級,linux-headers-3.5.0-22請你只有在信任該來源時才可安裝這個檔案,linux-headers-3.5.0-22-generic是錯誤的硬體架構AMD64,linux-headers-3.5.0-22-generic就沒法滿相依性.

在上述的網址入面要找什麼字眼將LinuxTV Leadtek WinFast PxDVR3200 H失敗的情形加入去,但我已忘記打什麼指令而知道它失敗....

這個/var/log/kern.log指令wingyan@wingyan-desktop:~$ /var/log/kern.log
bash: /var/log/kern.log: 拒絕不符權限的操作.

1. sudo cat /var/log/kern.log # 全部 顯示 出 內容
2. 顯示 出 最後 幾筆 內容
sudo tail -10 /var/log/kern.log # 顯示 出 最後 10 筆內容
sudo tail -30 /var/log/kern.log # 顯示 出 最後 30 筆內容

哦!原來這樣,謝謝你POLOSHIAO.