最近換新的linux mint 14 64bit

可是換完之後發現沒有聲音

音效卡式外接的 莫邪2010

google一下發現似乎是驅動問題

可是找半天也沒找到驅動

不知道有沒有大大也是 外接音效卡的

控制器：Via ENVY24
codec: VT1617A
這兩個關鍵字...吧

已經安裝套件了 可是還是沒有輸出聲音

音效控制軟體有偵測到音效介面嗎？

有

不過每個都試過沒聲音

lspci上也有看到

安裝 pavucontrol 套件看看 有比較多的 調校項目
sudo apt-get install pavucontrol # universe 套件庫 需打勾

還可以安裝 pavumeter 套件看看
sudo apt-get install pavumeter # universe 套件庫 需打勾

參考
PulseAudio

安裝完還是一樣沒有聲音

照著網頁

Click on Manage Groups, and scroll all the way to the bottom of the list where you will find:

pulse-access
pulse-rt
Make sure to highlight each, one at a time, and click Properties. Just put a check next to each user that you want to be able to have access to sound. For example, there's "ted" and "root" and "kamilion" listed, and you only want "kamilion" to have access to sound, that's the one to check, leave the other two blank.

Note: The "pulse" group is for pulseaudio internal use, and normal users should not be added to this group.

CONFIGURING PULSEAUDIO

Now, go into Applications -> Sound and Video -> click on PulseAudio Preferences.

Checkmark all three options under Network Access. This will allow other computers on your LAN with PulseAudio to access this computer's sound devices.
Checkmark Enable Multicast/RTP Receiver. This allows receiving multicast streams from other systems on your LAN.
Checkmark Enable Multicast/RTP Sender. This allows sending multicast streams (One source sends packets, all others may receive them simultaneously)
Leave the other options alone for now, unless you want to loop outgoing streams through the local speakers.

Next go into System -> Preferences -> Sound and make sure that Enable Software Sound Mixing is checked. Also, under the Sounds Tab, I set devices to Autodetect.

Restart the current session with Ctrl + Alt + Backspace to enable pulseaudio (Save any work 1st)


這段找不到 pulse-rt 這群組 而且後面看不太懂要改甚麼地方@@

從終端機
pavucontrol
會出現一個 volume control 的 圖形界面
每個標籤界面 都調整看看

還是沒有聲音

接到主機板上面的就有

digital stereo IEC958 這是音效卡的嘛？

其他都是 Analog

每個都條過了 接在音效卡上都沒聲音

接在主機板上的 只有digital stereo沒聲音但是接回 音效卡也變成沒聲音

參考這一篇
"Digital Stereo (IEC958) Output + Analog Stereo Input"
#1 說要 選 "Analog Stereo Output" or "Analog Stereo Duplex"
#2 建議安裝 alsamixer
#5 提到一個 bug report
該 report #61 提到一個解決方法